Tutorials to .com

Tutorials to .com » Mechine » Autocad » AutoCAD Tutorial

AutoCAD Tutorial Articles


201: E-print (ePlot) and 17.9.1 Electronic print batch print (ePlot)
17.9.1 E-Print (ePlot) AutoCAD system with an electronic print (ePlot) function, through the print publication Electronic graphics can be posted to the Internet. Print details on e-Chapter 27. 17.9.2 Batch Print Autodesk in the AutoCAD system att...

202: Isometric projection of two-dimensional profiles and the use of axonometric projection model
Isometric projection is a simulation of three-dimensional objects have a specific angle along the parallel projection, and its essence is three-dimensional projection of two-dimensional objects. Therefore, Figure Drawing Isometric projection is base...

203: Isometric projection of the text
Isometric map in can not directly generate Isometric projection of the text, but can be used to rotate and tilt in the orthogonal view of the text into its Isometric projection. (1) switch to the left Axonometric face, the left side of the rectangu...

204: Print style
17.8.1 Introduction print style print style (Plotstyle) is a kind of object properties, to modify the appearance of print graphics, including the color of objects, such as linear and the line width can also be specified endpoint, connect, and fill s...

205: Isometric projection of the mark
In Isometric projection dimensioning mode, the same as adding text, the perspective of the need for its conversion to generate Isometric projection. Axonometric left side below the mark as an example to children aboutMi MouRex ? Br> (1) define...

206: Three-dimensional coordinate system
19.1.1 Three-dimensional Cartesian coordinate system of three-dimensional Cartesian coordinate system is two-dimensional Cartesian coordinate system, based on an increase of right-hand coordinates of the third dimension (that is, Z axis) formed. Coo...

207: In the face of Isometric Drawing simple graphics
To draw the following simple piece of Isometric map (as shown in Figure 18-3), and the corresponding learning Isometric map in a straight line with the arc of the painting. AutoCAD2002 system startup, and "acadiso.dwt" for the model to cr...

208: Create a simple three-dimensional object
Below to learn how to determine the three-dimensional points in AutoCAD and how to generate three-dimensional objects in two-dimensional graphics. 19.2.1 determine the three-dimensional points can be described using three coordinates of the previou...

209: Set of three-dimensional view
19.4.1 Setting the direction of view of three-dimensional space in AutoCAD, the user can be in different directions to observe the object. To set the direction of the command to view call as follows: Menu: 【View (view)】 → 【3DViews (three-di...

210: Three-dimensional modeling of the Millennium Hall
This chapter will be the new millennium by creating a three-dimensional shapes together (as shown in Figure 20-1) to study three-dimensional surface model in AutoCAD creation and editing. AutoCAD2002 system start to "acad.dwt" to create a...

211: Set UCS
The definition of 19.3.1UCS AutoCAD provides a number of ways to create a UCS, called the order for: Toolbar: "UCS" → , Or directly to the definition of the use of other icon, as shown in Figure 19-3. Menu: 【Tools (Tools)】 →

212: Form at the bottom of
Form at the bottom of the tower in the creation process, will learn to create a cylindrical surface and the rotation method of surface mesh. First "TOWER_D" layer set the current layer ⒔  IAN "layer closure of the drawings so...

213: Made the creation of the central tower
First "TOWER_M" layer set the current layer, and "MIAN" layer and "TOWER_D" layer closure. The current coordinate system is set to WCS. 20.4.1 Create the main choice of the central tower "Surfaces (surface)" ...

214: The upper part of the creation of the tower model
First "TOWER_U" layer set the current layer, and "TOWER_M" Layer closure. The current coordinate system is set to WCS. 20.5.1 create a tower at the top of the base 1. Drawing Hatch calls "3dpoly" command, and the foll...

215: Amend the order of three-dimensional
21.2.1 Three-dimensional ordered array of three-dimensional space in AutoCAD, the user can use to create three-dimensional ordered array of three-dimensional array of the specified object. Command with the same two-dimensional arrays, three-dimensio...

216: Other objects to create three-dimensional surface method
Millennium Hall in the creation of the process model has been studied in eight pre-defined in AutoCAD Surface of three-dimensional grid, that is, cuboid, cone, under the hemispheric side of the hemisphere surface, pyramid face, ball, ring and wedge ...

217: The entrance of the new millennium together to create shapes
First of all, to "GATE" layer set the current layer, and the closing down of all other layers. 20.6.1 use the Ruled Surface command Ruled Surface command to create the roof can be created between two objects in the surface mesh, the two o...

218: Attribute profile, attribute definition and use of
Properties (Attribute) is attached to the object of a variety of pieces of text data, it is a special kind of text object can contain a variety of user information needs. When the inserted block, the system will be displayed or prompted to enter att...

219: Attribute editor
AutoCAD2002 attribute provides enhanced editing commands and block attribute manager (BlockAttributeManager), and can thus be edited and managed properties. 12.3.1 editing a single attribute 1. A single attribute editing commands for editing a sin...

220: Attribute Extraction
Usually attribute that may be important to preserve many of the data, in order to enable users to make better use of the information, AutoCAD provides the attribute extraction command to specify the format used to extract the graphics contained in t...


Page 11 of 15
[1]   [2]   [3]   [4]   [5]   [6]   [7]   [8]   [9]   [10]   [11]   [12]   [13]   [14]   [15]