Tutorials to .com

Tutorials to .com » Mechine » Autocad » Solidworks how to use mapping project to gear

Solidworks how to use mapping project to gear

Print View , by: iSee ,Total views: 36 ,Word Count: 845 ,Date: Mon, 17 Aug 2009 Time: 10:08 PM

Introduction

Gear is a commonly used transmission parts, mechanical design process is often a need to design parts of the project as a result of mapping gear and more generally the difference between parts, in the use of general three-dimensional software to design three-dimensional graphics and can not be immediately after accurate two-dimensional graphics. This will greatly reduce the engineering and technical personnel, design speed, increase design cost. Solidworks for the more special parts designed a dedicated tool that can quickly solve the problem,

The design of three-dimensional graphics gear

First of all, the use of plug-ins solidworks gear and GEARTRAX accurate gear design three-dimensional graphics, the specific parameters for the number of teeth Z = 28, pressure angle α = 20, modulus m = 2.

As shown in Figure 1.1

Solidworks how to use mapping project to gear

Solidworks how to use mapping project to gear

Figure 1.1

Solidworks allows rapid projection of three-dimensional graphics into two-dimensional graphics, but for the special gear such parts we need to be dealt with appropriate technology in order to obtain accurate engineering graphics.

Figure 1.2 below, we found that the left gear parts tray has four icons, and now we have to use the third icon on the configuration works.

Solidworks how to use mapping project to gear

Figure 1.2

Click the icon, select Add configuration, pop-up "Add Configuration" dialog box, as shown in Figure 1.3

Solidworks how to use mapping project to gear

Figure 1.3

Configuration, type in the name of the name of their own requirements, can be determined. Click to add and activate the new configuration, we found that the design of the gear parts tree name was changed to "gear (engineering drawings)", which in this configuration, we can be in the works shown in the figure do not need to be compressed to achieve the characteristics of the hidden purposes. Parts gray part of the design tree is compressed the features in the works will not be displayed. This configuration makes the project map will be the pattern we need, but the assembly does not occur because of this change. Here we will be the number of teeth of gear 28 by the compression to 2, as shown in Figure 1.4.

Solidworks how to use mapping project to gear

Solidworks how to use mapping project to gear

Figure 1.4

The same way, again to add a new configuration, will profile all the compressed graphics to be shown in Figure 1.5.

Solidworks how to use mapping project to gear

Solidworks how to use mapping project to gear

Figure 1.5

Upon the completion of these basic work, you can correct the gear into the required two-dimensional graphics, and engineering drawings as shown in Figure 1.6.

Solidworks how to use mapping project to gear

Figure 1.6

Summary

The use of gear solidworks design, rapid and accurate. Engineering drawings of the production capacity is also amazing, and fully reflects the human solidworks design, which will bring China's machinery rapid development of the field.

Editor Recommended reading:

Solidworks spring-based Parametric Solid Modeling Technology

Spline curve Solidworks2009 3D Design Technology

SolidWorks-based Enterprise design library

SolidWorks-based perforated tin wire design

The use of c # open file SolidWorks2008 Parts

Bright spot in the top ten, the interpretation of SolidWorks 2008

CAD drawings will be converted into detailed three-dimensional model of SolidWorks

CAD plans to switch to SolidWorks to do three-dimensional processing


AutoCAD Tutorial Articles


Can't Find What You're Looking For?


Rating: Not yet rated

Comments

No comments posted.