Tutorials to .com

Tutorials to .com » Website » Freehand » Freehand9.0 lines and the full path on the

Freehand9.0 lines and the full path on the

Print View , by: iSee ,Total views: 2 ,Word Count: 1106 ,Date: Thu, 4 Jun 2009 Time: 8:17 PM

Freehand9, the lines and the path are two entirely different concepts, the existence of links between them instead of using language to make it clear, you can understand them: the path to control lines, but does not have is the meaning of the path; lines reflect the The body is like, but his own body is controlled by the path. Can also say this: the line is the path of a later stage another form.
In many cases, in order to facilitate processing and increase the speed of editing is often like the color to show hidden lines to show the object. Of course, the lines can also edit this section, we take a look at how to edit lines.

1, the status bar control.

Freehand9, in Stutas (the status bar, Figure) mode under the View menu, select "Flash Anti-alais", display mode can be converted to line display mode. In the first section, we briefly mentioned in the status bar, where I will introduce it in detail:
The status bar at the bottom of the interface is the default display panel, he shows that the pages of several important indicators of the operation and provide the corresponding control function, these indicators are from left to right: the ratio of display box view (shows the current View the document size), the two page buttons (forward and reverse page), view mode menu bar (the provision of five view display mode), the menu bar unit scale, integrated information column. Among them, the view mode to control the screen shown in column five ways:
Preview: Preview mode, which show the print preview mode to show the effect of close to print results, can show the most details, but also occupy the most memory.
Fast Previev: Quick Preview mode, this mode of mixed colors by reducing the series shows the way to reduce memory requirements, thereby enhancing the speed of display and preview mode compared to him but the effect is slightly faster times.
Key line: wire-frame model that will cast aside all the color attribute object to the path to show the outline of the object and the internal lines.
Fast Key line: fast frame mode, and Quick Preview mode of the same meaning, this shows the path of the mixed model to reduce the series, which will reduce some of the details of the transition in order to enhance the speed, the same drawback is that the effect of a little time.
flash Anti-alais: line display mode, the display mode is different from the previous four types of display mode, he is a Freehand9 new display mode, was selected to screen will show the lines and pay attention to the lines shown here, instead of the path.

2, Str control panel.
In the Stroke panel to focus on all the control lines (Figure), such as Width (width), filled with color (including the filling pattern), etc., Stroke panel can run a command Window / Inspectors / Stroke out;
Panel at the top of the "Type" menu controls the type of lines: None (None), Basic (monochrome), Custom (patterns), Pattern (mode):
Nome (none): This is one of the most simple, he would abolish the selected lines have shown that if the object is not filled, then the object will become invisible, but this does not mean that the object is deleted, you can not be visible here object to verify the application of filler.
Basic (monochrome): The color that will fill in the lines, was selected after the panel can adjust the fill color or line set the size of lines, adjusting the lines of endpoint type, the type of operation to adjust the corner. Method is very simple, directly in the control panel can be set.
Custom (design): This is a very useful feature, was selected, you can under the panel in its corresponding control: will be in a pre-set pattern Freehand9 applies to lines, as if filled with the same pattern, of course, can be like some others, such as the width of the control, just and "fill pattern", as the effect here can not be displayed on the screen, can only imagine the effect to edit to print.
Pattern (mode): the same and Custom, which is pre-set Freehand9 effect of some lines.

3, embedded with the expansion path.
Embedded in the path: a path to be elected to determine the implementation of the command Modify / Alter Path / Inset Path (embedded path). Inset Path command to quickly generate multiple contraction or as to enlarge the object, and a mixed manner to increase the effect of brightness. In the panel or by numerical control button embedded in the number of paths (Stpes), type (Type: overlap, much of the last three categories), as well as to generate the distance between the path (Inset) and so on.
Expansion path: a path to be elected to determine the implementation of the command Modify / Alter Path / Expand Stroke (expansion path). Expand Stroke command the result of expansion or contraction of the line will be, that is, adjust the line thickness, of course, can also set up lines of endpoint type, the corner type and the length of angle. Once the lines become wide enough, the application in which the effect of a number of fine fibers can be completed cents are, for example, through the clipboard will be filled with some of the lines in the image and create a texture effect - indeed, the implementation of the two orders Join too different from the path of a portfolio, will also achieve the effect of such a texture.
Join a similar order and are concentrated within the sub-menu in the Combine, they are for the purposes of lines, including the Union (combination), Divide (closed), Intersect (intersect) such an order. You can also order them as a path operation, in any case, to complete the effect, is the most important.
Next, we look at things behind.

FreeHand Tutorial Articles

Can't Find What You're Looking For?

Rating: Not yet rated


No comments posted.